Omniscio

More settings (S)

Reference entries for all Omniscio settings whose key begins with the letter S, covering one letter's span in the alphabetical settings reference.

On this page

Reference entries for all Omniscio settings whose key begins with the letter S.

Scheduled Messages

Turns the Scheduled Messages virtual project on or off. When enabled, a "Scheduled Messages" entry appears in the sidebar where you can compose a rich-markdown note to yourself and have it dropped into your inbox once or on a recurring schedule — a simple way to set future reminders without creating a full session. On by default. The feature ships on; what starts hidden is its sidebar row, which is a separate switch (scheduledMessagesSidebarEnabled) — the feature and its inbox delivery still work with the row hidden. Turn the feature off in Settings → Features; the sidebar row is now the Scheduled Messages Install in Marketplace → Inbuilt rather than a Settings row.

Show Scheduled Messages in sidebar

Shows or hides the Scheduled Messages entry in the sidebar. That entry is where you write a note to your future self and have it drop into your inbox on a schedule. This setting only controls the sidebar entry. The Scheduled Messages feature itself stays on, so a note you already scheduled still lands in your inbox with the entry hidden. Find it in Settings > Features. Default: off.

Screen Recorder

Shows the Screen Recording entry in the sidebar. Once enabled you can record your screen (with webcam overlay, multi-source layouts, and global hotkeys), then edit clips and browse them in a built-in library. While enabled, the recorder controls and configured countdown stay loaded so Quick Record can respond immediately; no screen, microphone, or camera is captured while idle. Recording quality, frame rate, click-ring style, watermark, countdown, and dozens of other capture options live inside the Screen Recording panel's gear menu, not in a separate Settings page. Off by default; this switch is now the Screen Recording Install in Marketplace → Inbuilt rather than a Settings row.

Record in an independent helper

On Windows, screen recordings are captured and saved by a separate helper program that runs outside Omniscio at high priority. A slow, frozen or crashed Omniscio cannot drop frames or end the recording. If Omniscio closes in the middle of a recording, the helper keeps going and shows a notification and a tray icon you can click to stop it; the footage is kept. Turn this off to record inside Omniscio the old way. Omniscio also falls back to the old way by itself whenever the helper cannot start. Find it in the Screen Recording settings gear, on the Advanced tab → Extras → "Record in an independent helper" (shown on Windows only), or ask an agent to change it for you. Default: on.

Recording notices

Desktop pop-ups for the instant-share feature of the Screen Recorder. You get one when a recording's share link is copied, one when the upload finishes, and one if the upload fails and the link had to be taken back down, so you are never left holding a link that does not work. These pop-ups are silent. The sound for them is controlled separately in the sound list under Settings > Notifications.

These pop-ups follow your other quiet controls: Silence all, Focus Mode and muted projects all hold them back. By default they appear only when Omniscio is behind other windows, since inside the app you already see a message on screen. Turn this off to stop all three pop-ups. Find it in Settings > Notifications. Default: on.

Recording quality

The encoding preset for new recordings: Economy, Balanced, High (the default) or Studio. Higher quality looks better but makes larger files. Set it in the Screen Recording settings gear, on the Recording tab.

Countdown before recording

How many seconds the on-screen count runs before capture starts: None/0 (start instantly), 1, 2, 3 (the default) or 5. The count itself is never included in the recording. Find it in the Screen Recording settings gear.

Start sound

Play a short chime the instant recording starts, so you get an audible cue that capture began — especially useful when the countdown is off. On by default. If system audio is being captured the chime may be faintly re-recorded at the very start. Find it in the Screen Recording settings gear.

Finish sound

Play a short three-note chime when a stopped recording has finished saving and is ready to share, so you know it is done without watching the screen. It plays after capture ends, so it is never recorded into the take. On by default. Find it in the Screen Recording settings gear.

Captions for new recordings

When on (the default), a finished recording is transcribed automatically so its captions and searchable transcript are ready without asking. When the cloud dictation engine is selected in Voice settings (the default), the take's audio is sent through Omniscio cloud dictation under your sign-in, exactly as dictation is; choose the on-device engine and Whisper transcribes on this computer instead. A take that captured no microphone and no system audio is skipped. Turn it off to have recordings wait until you ask for captions. Find it in the Screen Recording settings gear.

Auto-title recordings

Off by default. When on, a finished recording gets a short AI-written title from its transcript, saved as the recording name and used in the library, review window and share page — unless you named it yourself, which always wins. Each title is a small paid Anthropic call. A title is also written while Auto-summarize recordings is on, so this switch alone does not keep recordings AI-free. Find it in the Screen Recording settings gear.

Auto-summarize recordings

When on (the default), a finished recording with speech gets a short TL;DR and chapter list automatically once its transcript lands. After the one-time notice has been shown on this machine, the transcript is sent to Claude; a take with no speech sends nothing, and summaries stop at the shared daily AI cap. Turn it off to make summaries something you ask for. Find it in the Screen Recording settings gear.

Webcam shape

How the webcam bubble is framed in recordings: Rectangle, Rounded rectangle, Square, Rounded square or Circle (the default). The two rectangle shapes keep the camera's own wide proportions instead of cropping it to a square; the square and circle shapes crop the picture to fit the frame. Find it in the Screen Recording settings gear, on the Webcam & clicks tab → "Webcam shape".

Keep webcam shape

Keep the camera's own wide proportions instead of cropping it to a square — applies to the Rectangle and Rounded rectangle webcam shapes and is ignored for Square, Rounded square and Circle. Off by default, so existing recordings keep their square camera. Find it in the Screen Recording settings gear, on the Webcam & clicks tab.

Mirror webcam

Flip the camera left-to-right like a mirror in the live bubble, the Record preview and the finished video. On keeps the traditional selfie look; turn it off so text and gestures read the right way round. Default on. Find it in the Screen Recording settings gear.

Video block shape

The shape of a plain recording's video block (a take with no camera): Rounded (the default), Square or Circle. The recording is saved as a rectangle and the shape is applied when you watch or edit it, so changing this later never re-encodes anything. Find it in the Screen Recording settings gear.

Video block corner radius

How round the corners of a Rounded video block are, from 0 (a sharp square) to 50% (fully rounded). The default is a soft 12%. Ignored by the Square and Circle shapes. Find it in the Screen Recording settings gear.

Webcam preview size

How big the floating live self-view is while you record: Small, Medium (the default) or Large. This preview is only on your own screen and is never included in the recording. Find it in the Screen Recording settings gear, on the Webcam & clicks tab.

Webcam preview corner

Which corner the floating live self-view docks into while you record: bottom right (the default), bottom left, top right or top left. You can also drag it anywhere once recording; it is never captured in the video. Find it in the Screen Recording settings gear, on the Webcam & clicks tab.

Click ring style

How the ring that marks each click is drawn: Outline (the default), Filled or Pulse. Find it in the Screen Recording settings gear, on the Webcam & clicks tab → "Click ring style".

Click ring color

The color of the cursor glow and click rings. The default is gold (#ffd700), matching the editor's original look. Find it in the Screen Recording settings gear, on the Webcam & clicks tab → "Click ring color".

Click ring size

How big the cursor glow and click rings are, in pixels, from 16 to 200. The default is 48 px. Find it in the Screen Recording settings gear, on the Webcam & clicks tab → "Click ring size".

Watermark

Burn a watermark into recordings: Off (the default), Text or Image. Choose the text or image and its corner in the rows beside it. Find it in the Screen Recording settings gear, on the Watermark & intro tab.

Watermark text

The text shown as the watermark when the mode is Text, up to 100 characters. Find it in the Screen Recording settings gear, on the Watermark & intro tab.

Watermark image

The image file used as the watermark when the mode is Image. Leave it blank to use no image. Find it in the Screen Recording settings gear, on the Watermark & intro tab.

Watermark position

Which corner the watermark sits in: bottom right (the default), bottom left, top right or top left. Find it in the Screen Recording settings gear, on the Watermark & intro tab.

Intro card

Show a title card for a moment before recording begins. Off by default. Find it in the Screen Recording settings gear, on the Watermark & intro tab.

Intro card name

The name shown on the intro card before recording begins, up to 100 characters. Only used while the intro card is on. Find it in the Screen Recording settings gear, on the Watermark & intro tab.

Auto-share when recording stops

When you stop recording, upload the video in the background and copy its share link to your clipboard with a "Link copied" message, so one paste shares it. On by default; off means Stop just saves the recording locally. Find it in the Screen Recording settings gear, on the Sharing tab.

Open the review when recording stops

Open the finished recording's review window by itself when a recording stops, so you can share or discard it straight away. Off means Stop saves quietly and you open it from the Library instead. On by default. Find it in the Screen Recording settings gear, on the Sharing tab.

Recording expiry

The expiry prefilled for share links you create by hand from the share box: 1 day, 7 days (the default), 30 days or never. Find it in the Screen Recording settings gear, on the Sharing tab.

Share link expiry

The expiry for links created automatically when a recording is shared on stop, and by the "Stop & share" action. Defaults to Never so a quick link you paste into a chat or SOP does not silently die. Find it in the Screen Recording settings gear, on the Sharing tab.

Auto-zoom to clicks

Records your mouse pointer during a recording so the editor can show it over the video. Off by default. Automatic zoom-ins around your clicks arrive with the full recording editor, which is not shipped yet — until then this setting only turns cursor tracking on. It is hidden from the Screen Recording settings gear's Advanced tab → Extras unless you already had it on, so you can still turn it off.

Click sound

Play a click sound whenever you click while recording. Off by default. Find it in the Screen Recording settings gear, on the Advanced tab.

Silence notifications while recording

Turn on Do Not Disturb automatically while you record, for privacy and focus, and switch it back off when you stop. Off by default. Find it in the Screen Recording settings gear, on the Advanced tab.

Record for Agent

When on (the default), the Record for Agent tools appear in the Screen Recorder: mark moments while you record, then send the finished recording to an agent to review with you. Find it in the Screen Recording settings gear, on the Advanced tab → Extras → "Record for Agent".

Let Gemini watch the video

Off by default. When on, the optional Gemini pass watches the WHOLE recording and writes its reading of what moves, changes or repeats, which is handed to the agent reviewing the take with you — instead of the agent seeing only a few stills plus its transcript. Turning it on uploads the entire recording to Google, not just the moments you marked, so it stays off until you decide the extra exposure is worth it. It uses the same Gemini API key as the rest of the app. Find it in the Screen Recording settings gear, on the Advanced tab → Extras → "Let Gemini watch the video".

Export folder

Where exported recordings are saved. Leave it blank to use the app's own screen-recordings export folder. Find it in the Screen Recording settings gear, on the Advanced tab.

Copy to clipboard only

When on, a screenshot goes straight to the clipboard with no PNG saved and no row added to the screenshot library. Off by default, which saves the file and copies it. Screenshots settings → "Copy to clipboard only".

Capture notifications

How much the screenshot tool tells you after a capture: All (the default) shows the routine "saved" confirmation and failure warnings, Errors only silences the routine confirmation but still warns when a capture fails, and Off shows nothing. Screenshots settings → "Capture notifications".

Capture sound

Play a short camera-shutter tone when a screenshot is captured. On by default; it fires on success even when notifications are set to Errors only or Off. Screenshots settings → "Capture sound".

Snip to Text (OCR)

Turn on Snip to Text: capture part of the screen and have the text in it read out into an editable window you can copy. Each capture is a paid Anthropic API call, so it is off by default. Screenshots settings → "Snip to Text (OCR)".

Screenshots

Shows the Screenshots entry in the sidebar — a built-in snip tool paired with its own library. Snip any region of your screen with a global hotkey (Ctrl/Cmd+Alt+S), then annotate, copy, or share the result. Turned off by default for new installs; users who previously had "Screen Capture" enabled keep their Screenshots area. When off, the sidebar row is hidden and the snip hotkey stops working. This switch is now the Screenshots Install in Marketplace → Inbuilt rather than a Settings row.

Snip hotkey

The keyboard shortcut that starts a screenshot snip from anywhere on your computer. The default is Ctrl+Alt+S (Cmd+Option+S on a Mac). Settings > Features shows the current shortcut but does not let you edit it. To change it, use the "Open Screenshots settings" button on that row, or open Screenshots and choose Settings, then press the new combination. The change takes effect right away with no restart.

The shortcut only works while Screenshots is turned on. If another app already uses the combination, Omniscio cannot claim it, and you can use the New snip button inside Omniscio instead or pick a different combination. A combination made only of modifier keys cannot be used, and on a Mac the system's own screenshot shortcuts are never taken over. Default: Ctrl+Alt+S.

Reopen last scratchpad

When on (the default), opening the Quick Scratchpad or the floating capture box brings back the note you last had open instead of starting blank — handy when you capture a few thoughts in a row. Off means every open starts a fresh, empty note. Find it under Settings → Features as "Reopen your last scratchpad".

Quote button on agent replies

When on (the default), highlighting text inside an agent's reply in a session shows a small "Quote" button next to your selection, with the mouse or the keyboard. Taking it attaches exactly that passage to the session's message box as a quote reference, so you can ask about it. Off hides only that button: "Quote in reply" in the reply's ⋯ menu, which quotes the whole reply, always stays. Desktop only — the phone keeps the menu action.

Show Scratchpads in sidebar

Shows or hides the Scratchpads entry in the sidebar. Scratchpads is always reachable from the toolbar button and its keyboard shortcut, so the sidebar entry is optional. Turn this on if you like having a Scratchpads row in the sidebar next to your projects. This setting changes only the sidebar entry and never touches your notes. Find it in Settings > Features. Default: off.

Remind me when a key is overdue for a change

Once a week, Omniscio checks whether any secret key held by this computer has gone longer than its planned change interval since it was last changed, or was never recorded as changed. If so, you get one inbox card naming what is overdue and how to change it. Omniscio never changes a key for you, never reads a key's value, and sends nothing off the computer.

This check is meant for people who run Omniscio from its source code. It reads a record that only a source copy carries, so on an ordinary installed copy there is nothing to check and no card ever appears. Turning it off also clears any card already showing. Find it in Settings > Diagnostics. Default: on.

Email me a copy of every security alert

When Omniscio raises a security alert, it also emails a copy to the address on your Omniscio account. That way a copy still exists even if someone deletes the records on this computer. It sends at most one email per kind of alert per hour, and at most 20 a day. Alerts that cannot wait are still sent after that.

If your account has no email address to send to, Omniscio raises an alert saying security alerts cannot leave this computer. Turning this off only stops the emails. Your security alerts themselves are never changed. Find it in Settings > Notifications. Default: on.

Watch the files an attacker would change

Omniscio keeps a signed record of the files that matter most for security, because of what they run: your Claude settings and hooks, the matching files for this project, the control token file, the security-related settings, and the installed app itself. It checks that record each time it starts and once a day. If one of those files changes and Omniscio did not change it, you get one inbox card naming what moved.

Nothing from inside those files ever leaves your computer. Turning this off stops the checking and removes the card. Find it in Settings > Diagnostics. Default: on.

Also restart paused sessions

Part of the Session Refill feature, which is still in development. That feature restarts work that was interrupted so that a number of sessions stay running. Normally it only restarts sessions that stopped by accident, such as one that crashed, was cut off, or failed to answer.

Turn this on and a session you paused counts too. It is un-paused when its turn comes. It is off by default because pausing is something you did on purpose, so undoing it should stay your call. It only has an effect while Session Refill itself is switched on. Default: off.

Daily restart budget per session

How many times the session refill governor may restart any one session in a single day. The cooldown is only a delay between attempts; this is the budget, and it is what stops the governor circling back to the same stuck session over and over. Leave it at 1 unless you specifically want repeat nudges. Range: 1–50.

Session chat box uses the new shared editor

Switches the box where you type prompts to the same editor used by the other writing boxes in Omniscio. In it, lists nest when you press Tab, Enter carries a list on to the next item, and pressing Enter on an empty bullet steps back one level. Your send key does not change. Turn this off to go back to the older box. The change takes effect right away, with no restart. Find it in Settings > Sessions. Default: on.

Session title style

How AI-written session titles are phrased: brief (a few words), descriptive (the default — a short summary of the work), journey (how the session has evolved), latest topic (what it is about right now), or custom, which uses the prompt you write yourself. Only consulted when session naming is set to AI titles.

Cross-post share comments to Team Chat

Controls whether comments left on a shared artifact are automatically posted into a linked Team Chat channel. Default on. Turn it off if you want share feedback to stay in Shares only, without making noise in a channel.

Enable commenting on new shares by default

This is the Share Comments on/off switch (Settings → Share Comments → "Allow comments on new shares"). When on (the default), every share you publish gets a comment box, so viewers can leave feedback right away. When off, Share comments is switched off as a feature: new shares publish with no comment box, and the Shares panel hides every comment, comment count, "N new" pill, the "New comments" and "Mentioned you" sections, and the Shares sidebar count. Shares you already published keep their comment box, because a share's page is built when you publish it; republish one while the switch is off to take its comment box away. Comment data keeps syncing in the background, so turning the switch back on shows everything at once.

Notify me about comments

When on (the default), Shares in the sidebar shows a count of new comments on your shared artifacts and new @mentions of you on other people's shares. Comments never become inbox notifications — they live in Shares, where every share with unread comments is pinned in a "New comments" section at the top of the list (even an expired or revoked one), shows an "N new" pill, and its unread comments carry a "New" tag until you open the share. Turn this off to hide the sidebar count; the pills inside Shares still show.

Brand colour

The accent colour your branded share pages use: the top bar, the copy and share buttons, the page glow, the avatar ring, the upload bar and the video player's accents. Pick it with the colour picker or type a code such as #1a2b3c. If a colour would be hard to read on a light or a dark screen, the page lightens or darkens it until buttons stay readable. Leave it unset to keep the Omniscio colours. Applies only while "Brand your share pages" is on. Settings → Sharing.

Brand your share pages

Off by default; Pro and above only. When on, every screen recording, video, screenshot and still-uploading page you share from then on shows your logo and brand name in the top bar instead of the Omniscio bar, uses your logo as the browser-tab icon, shows your name in link previews, and uses your brand colour. The small "Made with Omniscio" footer always stays. Links you shared before turning this on keep the Omniscio look until the app rebuilds that page. On the free plan, signed out, or when your plan can't be confirmed, pages show the normal Omniscio look even with this on. Settings → Sharing.

Brand logo

The logo shown in the top bar and as the tab icon of your branded share pages: a PNG, JPG or WebP image up to 512 KB. When you choose it, Omniscio checks the file and saves its own copy, so moving or deleting the original later doesn't affect your pages. If the saved logo can't be read, the page shows your brand name alone. Settings → Sharing.

Brand name

The name shown in the top bar of your branded share pages and used as the site name in link previews (up to 60 characters). With no name and no logo, the page shows the normal Omniscio bar. Settings → Sharing.

Brand link

Where your logo and name link to when someone clicks them on a branded share page. Must be a full web address starting with https:// or http://. Leave it empty and the logo and name aren't a link. Settings → Sharing.

Open new shares automatically

When on, a share you publish opens immediately in the built-in viewer. A share an agent publishes shows a one-click "Go there" toast rather than forcing a screen switch. Default off (opt-in). Has no effect unless "Open share links in app" (sharesOpenInApp) is also on.

Open share links in app

When on (the default), clicking a share link opens it in Omniscio's built-in viewer rather than your system browser. The built-in viewer lives in the main window only, so a share link clicked in a popped-out session or project window, or in the KMS, Writer or project-doc windows, opens in your system browser instead. Desktop only — on web or mobile the link always opens in the browser regardless of this setting. Accepted values: true (in-app) or false (system browser).

Show my name on shared videos

When on (the default), every video you share — a screen recording, a project video or an MP4 an agent publishes — shows your Omniscio account name and photo (or your initials) under its title, beside the date the link was first shared. Turn it off to show only the date. The page is saved when it is published, so turning this off reaches a link you already sent the next time it is refreshed: a screen recording on its next re-share, a published video when POST /share/refresh-video-pages runs. Settings → Sharing.

Show Shares in the sidebar

Shows or hides the Shares entry in the sidebar. That entry is where every share link you have published lives, with its view count, expiry, password and comments. This only controls the sidebar row: your share links stay live and openable, and anyone you sent one to is unaffected, whether the row is shown or hidden. On by default. Find it in Settings → Sharing.

Tell agents the shell remembers its folder

On by default. Adds a short note when a session starts telling the agent that its shell keeps the folder it changed into, so it stops re-entering the same folder before every single command. It removes a small tax that every default-settings user otherwise pays on every shell command, which is why it ships on. Purely an instruction to the agent; it changes nothing about how commands actually run. Turn it off to drop the note. Settings → Features.


Show alternative AI providers

Reveals the additional AI provider panels (Codex, Gemini, Anti-Gravity, DeepSeek, Kimi, OpenCode, Cursor) in the new-session menu and in Accounts & Providers. On by default — a fresh install shows the extra provider panels alongside Claude. Turn it off in Settings → Accounts & Providers to go back to Claude only.

Show bookmarks toolbar button

Shows the bookmarks button in the header toolbar, which opens a quick-access popover of your saved URLs and links. On by default. Turn it off in Settings → Widgets to hide the icon; the popover becomes unreachable, but your saved bookmark rows are preserved and reappear if you turn it back on.

Show recipe pipeline lane sessions

Reveals the per-lane sub-sessions that recipe pipelines spawn in the sidebar. Off by default to keep the sidebar uncluttered — lanes auto-archive on clean completion anyway. Notifications remain silent for lane sessions regardless of this setting. Turn it on if you want to watch individual pipeline stages as they run.

Show context-use indicator

When on, a context-percent ring appears in the session header so you can see how full the context window is at a glance. Hidden by default to keep the header clean. Turn it on in Settings → Sessions if you want a quick visual check before a session runs out of context.

Show subagent activity

Chooses where subagent results show. When on, a chip appears in the session UI while the agent has dispatched subagents (Task tool fan-outs) that have been running for more than about 15 seconds, and a collapsible result card is added to the transcript when each subagent finishes. When off, there is no chip and no card in the transcript; instead, open the arrow on the agent's answer and a "Ran N subagents" line sits at the top of its activity section, opening to one card per subagent with its result, time and any failure. The same cards also carry a subagent's own narration as it works, attributed to the subagent — that text is never folded into the session's reply, so a subagent's report can never render as the session's final message. Off by default; installs an older update had switched on were turned back off once, and turning it on again sticks. The underlying tracking that keeps the stall watchdog patient during long fan-outs runs unconditionally.

Sidebar position

Places the project and session sidebars on the left or right side of the window. Accepted values: "left" (default) or "right". Change it from Settings → Appearance or from the Settings home page's popular shortcuts.

Silence recipe steps on clean completion

When on, mainline recipe step sessions and the orchestrator are automatically archived when they finish cleanly — no errors, questions, or trouble markers. Off by default, which keeps completed recipe sessions visible on your board. Turn it on to declutter the inbox after long audit or pipeline runs.

Skill slash-command autocomplete

When on (the default), typing a leading "/" at the start of the message composer opens an inline menu listing your installed skills — filtered as you type — so you can insert a skill command with arrow keys, Enter/Tab, or a click. Only triggers when "/" is the very first character, matching when the Claude CLI treats input as a slash command, so a mid-sentence slash (like "and/or" or a file path) never opens the menu.

Personal Slack account

When on, Omniscio sends Slack messages as you (OAuth, your personal account) rather than as the Slack bot. Requires bot setup to be completed first. Turn it on in the Slack settings after connecting the bot if you want outbound messages to show your own identity.

Small PC mode

Runs Omniscio with lighter defaults on a computer with limited memory (RAM). Idle sessions are released after 5 minutes instead of 15, panels are not kept warm in the background, inbox sessions are not drawn ahead of time, and the number of sessions that can run on this computer shrinks to fit its memory. On Windows it also stops using the graphics card to draw the app windows, which saves memory; that part starts after a restart and makes the frosted panels solid.

Auto turns this on and off by itself, based on how much memory the computer has. Off always uses your own settings. This mode only replaces settings you have left at their shipped values. Anything you chose yourself is kept, and nothing is changed in your saved settings. Find it in Settings > Performance, under the advanced options. Default: Auto.

Offer Smrzz on YouTube links in chats

When a YouTube video link shows up in a session or in Team Chat, Omniscio adds a quiet "Summarize with Smrzz" action next to it. Nothing happens unless you click it. Turn this off to stop the action from appearing. It only appears while Smrzz itself is available, which it is for everyone from 6 November 2026. Default: on.

Snooze notes

When on, the snooze palette shows an optional note field so you can leave a short reminder for yourself that appears when the snooze fires — for example, "follow up on the invoice" or "check if the build passed." Off by default.

Soniox voice ID

The voice ID used when Soniox is selected as your text-to-speech provider. Enter a preset voice ID from the picker in Settings → Voice Control, or paste a custom Soniox voice ID into the text field to use a voice not listed in the presets. Empty means no voice is selected for Soniox.

Speechify voice ID

The voice ID used when Speechify is selected as your text-to-speech provider. Pick from the available Speechify voices in Settings → Voice Control, or enter a custom voice ID manually. Requires a connected Speechify API key.

Sticky Notes

When on, enables floating sticky notes on your desktop — small always-on-top windows you can pin anywhere on screen for quick references or reminders. On by default; turn it off in Settings → Features.

Store my AI keys on Omniscio's server

Keeps a copy of your own AI provider key on Omniscio's server, stored encrypted, so your cloud sessions can use it without going through this computer. Today this applies to the DeepSeek key (and a DeepInfra key if you have one), and the switch appears with the DeepSeek settings. Removing a key here also withdraws its stored copy.

Turning this off withdraws every copy stored this way, and turning it on again sends your saved keys back up. Keys are only stored while you are signed in to Omniscio. Find it in Settings > Accounts, in the DeepSeek section. Default: on.

Storyboard cost check

When on, Omniscio compares the price estimate for a Storyboard run with your Image Studio credit balance. If your balance may not cover the run, the estimate is marked with a low-balance warning so you can see it before you generate anything. Turn it off to skip that balance check. Find it in Settings > Built-in Apps, in the Image Studio section. Default: on.

Auto-summarize mail from these senders

The senders whose emails get a "Catch me up" summary automatically the moment you open them, without you asking. Each entry is either a full address or a bare domain like acme.com, which matches any address at exactly that domain (never a subdomain, never a partial match). Empty is the default, so nothing is summarized automatically until you add someone, and every summary is a deliberate click until then. Manage the list in Settings → Email & Summaries, or toggle a sender straight from an open email. Holds up to 200 entries.


Supermail "Catch me up" AI model

The AI model that writes the Supermail "Catch me up" thread summary. Empty (the default) uses the built-in cheap OpenRouter model with Claude Haiku as a fallback. Pick any model from the catalog to override — its provider is resolved in the main process and Claude Haiku is always kept as a backup for unavailable picks. Choose it from the model picker in Settings → Email & Summaries. Only consulted when the AI summary feature is on. A model picked here is also the one Supermail Plain Speak uses for its cards; left empty, Plain Speak uses DeepSeek V4.1 Flash instead (Catch me up keeps its own default).

Supermail "Catch me up" prompt

A custom prompt (up to 4,000 characters) that replaces or supplements the default instructions given to the AI when it generates a Supermail thread summary. Leave it empty to use the built-in prompt. Only consulted when the AI summary feature (supermailAiSummaryEnabled) is on.

Supermail "Catch me up" trigger

Controls when the Supermail AI thread summary runs. "manual" — you click a "Catch me up" button to trigger it. "auto" — the summary runs automatically each time you open a thread. Default "manual". Only applies when the AI summary feature is on.

Supermail Plain Speak automatic inbox

The one Supermail inbox whose email gets a Plain Speak card written for it automatically, stored as that inbox's id. Empty (the default) means nothing is written automatically: every card waits until you press V in an open email. Pick an inbox with the "Write cards automatically for" picker in Settings → Supermail, which lists your non-archived inboxes plus "None (only when I press V)". Email in the picked inbox gets its card in the background as you open it; email anywhere else makes no AI call until you press V. If the picked inbox is later archived or deleted, automatic cards stop. The picker only appears once Plain Speak is switched on in Settings → Features. Writing a card sends that email to an AI provider: DeepSeek by default, or whichever of your AI keys comes first in your key order.

Supermail row spacing

How much vertical space appears between emails in the Supermail list. Accepted values: "compact", "comfortable", or "spacious". Adjust it in Settings → Email & Summaries to match your preference for inbox density.

Supermail: recolour emails in dark mode

A new way for Supermail's reading pane to show designed emails in dark mode. Instead of inverting the whole email, it recolours backgrounds and text, keeps photos and brand colours as they are, uses the sender's own dark design when the email has one, and keeps logos readable. Off by default, so dark mode works exactly as it does today until you turn this on. "Show original (light)" still shows any email in its original light design, and turning this off goes straight back to the current dark mode.

Show emails in Omniscio inbox

Three choices for incoming Supermail email and the Omniscio inbox. "off" (the default) keeps mail out of the main inbox entirely. "all" gives each incoming email a card in the Omniscio inbox, alongside session notifications, with an inline reply box. "important" does the same for mail Gmail marks important only, so low-priority mail (what a split inbox would file under "Other") stays in Supermail. Mail a filter archives on arrival never makes a card either way.

Archive emails with their cards

When on, archiving an email card in the Omniscio inbox also archives that thread in Gmail — so it leaves Gmail, Superhuman and Supermail in the same gesture — and archiving the thread in Gmail clears the card on the next mail sync. It only applies while emails are shown in your inbox, and only your own gesture moves mail: replying from a card, an inbox rule, or an automatic clear never archives an email. On by default; turn it off to keep the card and the mailbox fully independent.

Supermail (sidebar)

Master switch for the Supermail panel. When on, the Supermail entry appears in the sidebar — a full email client (folders, compose, snooze) that connects to Gmail or IMAP. Off by default while the native port is in preview; turn it on in Settings → AI Coach.

Supermail header layout

How Supermail arranges the Mail/Sessions switch and the mail toolbar in its header. Accepted values: "current", "unified" (default), or "rail". A personal display preference with no impact on mail data.

Supermail sidebar badge count

What the number next to Supermail in the sidebar counts. "unread" — drops as you read messages (like Apple Mail or Gmail). "total" — drops as you archive, snooze, or label (like Superhuman's inbox-zero count). Default "unread".

Supermail email summary model

The model used for Supermail email summaries (video summaries and archive digests). "Automatic" (the default) inherits the global Utility AI model. Pick a specific model from the catalog to override it for Supermail summaries only. Find it in Settings → Sessions → Per-feature AI models.

Use connected Google account for Supermail

When on, Supermail reads your inbox through the Google account you already connected in Settings, so no separate Supermail sign-in is needed. Turn it off to use Supermail's own independent Google sign-in instead.

Who pays & who serves

For each AI model family you can run besides Claude (DeepSeek, GLM, Kimi, MiniMax, Meta, Qwen and OpenRouter), an ordered list of rows saying who pays for a session and which company serves it. A row is your own account with a company (the model's maker, or a reseller such as DeepInfra), Omniscio credits (Omniscio picks the company for its own credits), or the company lane for Omniscio developers. When a session connects it goes through the first row that can serve right now: a row with no key, no sign-in or no credit is skipped, and when a row runs out of credit its account is skipped by every session (in every family that pays from it) until Omniscio tries it again — one session every 10 minutes — or a balance check sees money. The running session moves to the next row and carries on, and one inbox card per account says so. The model you picked never changes, only who pays and which company answers. A reseller row whose company gives no discount on repeated (cached) text is marked, because the same work can cost several times more there; DeepInfra gives the discount, so its DeepSeek rows carry no mark. A DeepSeek row can be limited to DeepSeek’s peak-price hours (the moon button, or "onlyDuring": "deepseek-peak"), so it serves only while DeepSeek charges double. Cloud sessions use your own account with the model's maker, or Omniscio credits.

Edit it in Settings → Accounts → Who pays & who serves, as rows or as JSON text. The lists start from the keys and choices you already had, and a family you leave out of the JSON gets its starting list back; an empty list means that family's sessions cannot connect. Stored as an object mapping each family to its rows, for example {"deepseek": [{"pay": "you", "vendor": "deepseek"}, {"pay": "omniscio"}]}: pay is you, omniscio or company, and vendor names the company on your own account.


Use Omniscio's recommended models

Keeps the default model and thinking level for each AI engine on Omniscio's current recommendation, and updates them when the recommendation changes. Omniscio checks for the recommendation at startup and every six hours. It only changes a default when the new value is one your installed version supports, and if the check fails for any reason your settings are left alone.

If you pick your own default model or thinking level, this switches itself off so your pick is never overwritten. Turn it back on and Omniscio syncs right away. Find it in Settings > Sessions. Default: on.


Spacing after the first few minutes of a restart

How many seconds to leave between session starts once the warm-up window above has passed. 0 (the default) keeps using the normal restart spacing for the whole batch, so an install that has never touched this pair paces exactly as it did before. Fractional values are allowed. Range 0–30.


Warm-up time after a restart

When Omniscio restarts a batch of sessions, this is how long the warm-up lasts, in minutes, measured from the start of the restart — the first few minutes start more gently. 0 means no warm-up, so the spacing below applies from the first launch. The default is 5. Ignored while the after-warm-up spacing is 0, because the two phases are then identical.

Ask before dangerous commands

Only shown while the Safety checks Lab switch is on (Settings, Lab). When on (the default), commands that can destroy work or change shared history (force-pushes, recursive deletes outside the project, world-writable permissions, piping a download into a shell, database drops, stopping system services, shutdown) always stop and ask you, even at the Autonomous and Full trust levels. Catastrophic commands are refused outright by a separate always-on protection. Turn it off and those commands follow your permission level like any other. See safety-checks.md.

Block writes to credential folders

Only shown while the Safety checks Lab switch is on (Settings, Lab). When on (the default), agents cannot write into folders that hold keys and logins (SSH keys, cloud credentials, Kubernetes and GPG folders, package-registry and git credential files) at any permission level, Full trust included. Shell commands that write there by redirection, copy, move or a download's output flag are refused too. A project .env file is different: writing one asks first. See safety-checks.md.

Keep secrets out of agent processes

Only shown while the Safety checks Lab switch is on (Settings, Lab). When on (the default), environment variables whose names look like keys, tokens, secrets, passwords or credentials are removed before an agent's command, tool process or scheduled script starts, so a script an agent runs cannot read them. The agent engine's own provider keys and Omniscio's own session tokens are kept. If a tool really needs one of the others, list its exact name under Environment variables to let through (safetyEnvPassthrough). See safety-checks.md.

Allow agents to reach private network addresses

Only shown while the Safety checks Lab switch is on (Settings, Lab). Off by default. While off, agent web fetches and web-style (HTTP/SSE) tool servers are refused for addresses inside your computer or network: private ranges, link-local, carrier-grade NAT and cloud-metadata addresses. Turn it on only if agents must call a local service. Cloud-metadata addresses stay refused even when it is on. A command an agent runs in a terminal, such as curl, is not covered either way. See safety-checks.md.

Apply the site blocklist to every agent web tool

Only shown while the Safety checks Lab switch is on (Settings, Lab). When on (the default), sites you blocked or marked no-access for Agent Web are also refused by the built-in engine's web fetch tool, by search tools and by the app's own fetches, including after a redirect. Turn it off to keep the blocklist for Agent Web alone. Commands typed into a terminal, such as curl, are not checked either way. See safety-checks.md.

Check project instruction files for hidden commands

Only shown while the Safety checks Lab switch is on (Settings, Lab). When on (the default), a project's CLAUDE.md, AGENTS.md, GEMINI.md, .cursorrules, Copilot instructions file and .claude/rules set are scanned before a session reads them for text that tries to take over the agent. A flagged file is still loaded, but fenced and marked as untrusted text the agent must not follow, and you get one Needs You alert per file version with an Open file button. Files over 512 KB are skipped by the check. See safety-checks.md.

Check memory edits and imports

Only shown while the Safety checks Lab switch is on (Settings, Lab). When on (the default), new memories, edits to a memory's title or tags and imported memory files are scanned for hidden instructions before they are saved, because every later session reads a saved memory. When memory files are imported, a flagged item is held back instead of imported; the import dialog offers Import anyway. See safety-checks.md.

Check scheduled prompts

Only shown while the Safety checks Lab switch is on (Settings, Lab). When on (the default), the prompts of scheduled jobs and recipe schedules are scanned when you save them (a flagged prompt is still saved, with a warning) and again before each run. A flagged prompt's run does not start; a Needs You card offers Run anyway, Skip this run and Edit job. Run anyway remembers that exact prompt text, and editing the prompt checks it again. See safety-checks.md.

Warn about known-vulnerable packages

Only shown while the Safety checks Lab switch is on (Settings, Lab). Off by default. When on, once a day (and shortly after start-up) the engine command-line tools and the pinned npx packages your MCP servers use are looked up in the public api.osv.dev list of known security problems. Only package names, versions and the package type are sent: no file paths, project names, keys or account details. A package reported as malicious, or with a critical problem, raises a Needs You alert naming it and the fixed version. Offline, the check is skipped and retried the next day. See safety-checks.md.

Suggest rules from my approvals

Only shown while the Safety checks Lab switch is on (Settings, Lab). When on (the default), allowing the same kind of command by hand at least 3 times in 30 days across at least 2 sessions makes a suggested rule appear under Settings, Workflow, Agent permissions, reduced to the command's leading words. Nothing is added until you click Add as a rule, and Dismiss hides it. Turn it off to stop suggestions appearing. See safety-checks.md.

Refuse catastrophic commands

Always on by default, and not behind the Lab switch. Commands that wipe a disk, a home folder or a whole system (for example rm -rf /, a fork bomb, format C:) are refused at every permission level, Full trust included, with no approval card and no allow rule able to let one through. Find it in Settings, Workflow, Agent permissions. Turning it off removes this protection. See safety-checks.md.

Refuse asks nobody is there to answer

Always on by default, and not behind the Lab switch. When a scheduled job, recipe, automation, trigger or hidden session needs approval, the ask is refused at once with the reason that nobody was there to approve it, instead of waiting forever. You get one Needs You alert per session and command with an Open session button. Find it in Settings, Workflow, Agent permissions. See safety-checks.md.

Remove secrets before text leaves this computer

Always on by default, and not behind the Lab switch. Keys, tokens and passwords are masked in text the app sends on an agent's behalf: automation messages, scheduled-job deliveries and errors returned by Omniscio's own tool servers. Commit IDs and share links are left intact so they stay usable. Find it in Settings, Workflow, Agent permissions. See safety-checks.md.

Smart approval daily spending limit

Only shown while the Safety checks Lab switch is on (Settings, Lab). The most the Smart permission level may spend in a day on its background model, in dollars. The default is 0.50 and the range is 0.05 to 10. Every call is billed as a smart-approval cost to the asking session. Once the limit is reached, Smart sessions ask you instead until tomorrow. See also agent-permission-level.md. See safety-checks.md.